Currency
CAD - Canadian Dollar
MOTION CONTROL AT THE SPEED OF TECHNOLOGY™
1.877.737.8698
Language
Electromate.ca
Toggle Nav
Search
Contact Us
My Cart
My Quote
Menu
Account

Integrated Stepper Motors

Integrated Step Motors fuse step motor plus drive and control components into a single device. Integrated steppers offer a space-saving design that reduces wiring and saves on cost over separate motor and drive components.

Ideally suited for applications such as packaging and labeling, automated test and measurement, automated assembly and life sciences, StepSERVO™ motors from Applied Motion Products provide the next evolution integrated step motor technology.

Starting with a proven integrated motor design, we add a high-resolution incremental encoder and closed-loop servo firmware to create a motor that offers the best step motor performance available today. StepSERVO™ motors offer the same high-torque-at-low-speed and excellent holding torque characteristics of open loop stepping motors with the advantages of true closed-loop control.

These advantages include the ability to create peak torques from the motor up to 50% higher than the normal torque range of the same step motor running open loop. Closed-loop also means the motor only draws current when it needs it, so step motors now run cooler than ever before.  

Applied Motion Products StepSERVO Integrated Motors:

SSM Integrated Steppers 

  • NEMA 23 frame size motors
  • Ethernet (RJ-45) port for programming
  • EtherNet/IP industrial networking standard
  • Three motor lengths (stack lengths) available to provide the highest amount of torque in the shortest motor possible

TSM Series Integrated Steppers

  • NEMA 11 (New!), NEMA 17 and NEMA 23 frame size motors
  • RS-232 or RS-485 port for programming and streaming commands
  • Control options including CANopen fieldbus control, digital step & direction control, analog velocity mode, streaming commands and stand-alone operation using stored Q programs.
  • Three motor lengths available in each frame size to provide the highest amount of torque for each length

TXM Series Integrated Steppers

  • IP65 rated for wet and dusty environments
  • NEMA 24 frame size motors
  • RS-232, RS-485 or Ethernet port (M12) for programming, streaming commands and fieldbus/networking
  • Control options include CANopen fieldbus control, EtherNet/IP industrial networking, digital step & direction control, analog velocity mode, streaming commands and stand-alone operation using stored Q programs.
  • Two motor lengths available to provide both a lower torque and a higher torque option depending on application requirements 

STM Series Integrated Steppers

  • Available in NEMA 17, 23, and 24 frame sizes, including Washdown versions, combine the best of Applied Motion's drive and motor offering in a single, integrated device. 
  • Dynamic Current Control
  • Anti-Resonance
  • Torque Ripple Smoothing
  • Microstep Emulation
  • Choose between RS-232 or RS-485 port for programming and serial communications

JVL Industri Elektronik Integrated QuickStep Stepper Motors

 

JVL INTEGRATED STEPPER MOTOR FAMILY

MIS QuickStep Stepper Motors from JVL are compact versatile Integrated stepper motors that meet almost any need for a compact stepper motor system.  The force range is from 0.2 to 25Nm in flange size NEMA 17(43mm) to NEMA 43 (110mm).

The MIS motor - the complete motion solution Stepper motor with integrated controller.  All necessary components in one unit.

The basic idea in the MIS motors is to minimize the installation costs but also to make a component that is much better protected against electrical noise which can be a typical problem when using long cables between controller and motor.

The stepper motor, hall sensor or encoder and electronics are specially developed by JVL so that they together form a closed unit where the power driver and controller is mounted inside the motor in a closed section.

 

Integrated Stepper Motor Products:

View as List Grid

Items 1-15 of 23

Set Descending Direction
STM17 Integrated Stepper Motors by Applied Motion Products

STM17 Integrated Stepper Motors

Drive and motor fused into one NEMA 17 unit from Applied Motion Products. 18 configurations. Four control modes (R, S, Q, and CANopen). Powered directly by 12 to 48 VDC with no external drive needed.

CA$195.75
View Details
STM23 Integrated Stepper Motors by Applied Motion Products

STM23 Integrated Stepper Motors

Drive and motor fused into one NEMA 23 unit from Applied Motion Products. 20 configurations. Five control modes including EtherNet/IP and dual port EtherNet/IP. Powered directly by 12 to 70 VDC with no external drive needed.

CA$361.05
View Details
TXM34 Series StepSERVO Integrated Motors by Applied Motion Products

TXM34 Series StepSERVO Integrated Motors

IP65 rated NEMA 34 StepSERVO integrated motors from Applied Motion Products, combining a step motor and digital servo drive in one device. 14 configurations across Q Programming, EtherNet/IP, CANopen, and a TruCount encoder variant.

CA$2,109.75
View Details
TXM24 Series StepSERVO Integrated Motors by Applied Motion Products

TXM24 Series StepSERVO Integrated Motors

IP65 rated NEMA 24 StepSERVO integrated motors from Applied Motion Products, combining a step motor and digital servo drive in one device. 10 configurations across SCL, Q Programming, EtherNet/IP, and two TruCount absolute encoder variants.

CA$1,526.85
View Details
TSM34 Series StepSERVO Integrated Motors by Applied Motion Products

TSM34 Series StepSERVO Integrated Motors

IP40 rated with screw terminal and pluggable connectors. Combines a step motor and digital servo drive in one device. 18 configurations across Q Programming, EtherNet/IP, CANopen, and PROFINET.

CA$1,138.25
View Details
TSM23 Series StepSERVO Integrated Motors by Applied Motion Products

TSM23 Series StepSERVO Integrated Motors

Combining a step motor and digital servo drive in one device. 14 configurations across step and direction control, SCL, Q Programming, EtherNet/IP, CANopen, and a TruCount absolute encoder variant.

CA$810.55
View Details
TSM17 Series StepSERVO Integrated Motors by Applied Motion Products

TSM17 Series StepSERVO Integrated Motors

Combines a step motor and digital servo drive in one device. 16 configurations across step and direction control, SCL, Q Programming, and CANopen.

CA$783.00
View Details
TSM11 Series StepSERVO Integrated Motors by Applied Motion Products

TSM11 Series StepSERVO Integrated Motors

Combines a step motor and digital servo drive in one compact device. 6 configurations across 3 torque tiers and 2 connector styles, Q Programming over RS-485.

CA$530.70
View Details
STM24 Series Integrated Steppers by Applied Motion Products

STM24 Series Integrated Steppers

Fuses a step motor and drive into a single device. 8 configurations across RS-232, RS-485, EtherNet/IP, and CANopen, each available with or without an internal encoder.

CA$826.50
View Details
SSM23 Series StepSERVO Integrated Motors by Applied Motion Products

SSM23 Series StepSERVO Integrated Motors

Combines a step motor and digital servo drive in one device, communicating over a shared 10/100 MBit Ethernet port. 6 configurations across 3 torque tiers, SCL/Modbus TCP or EtherNet/IP.

CA$1,084.60
View Details
SWM24QF-3AE Integrated Steppers by Applied Motion Products

SWM24QF-3AE Integrated Steppers

Drive + Motor + Control Unit (RS-232), NEMA 24, 2400 mNm Holding Torque, Intergral Encoder

CA$1,318.05
View Details
DO-4118S-01 by Lin Engineering

DO-4118S-01

Drive + Motor, NEMA 17 Frame, 210 mNm Holding Torque

Request Quote
View Details
CE-5718M-02P by Lin Engineering

CE-5718M-02P

Drive + Motor + Control Unit, NEMA 23 Frame, 1220 mNm Holding Torque, Incremental Encoder

Request Quote
View Details
CE-5718X-01P by Lin Engineering

CE-5718X-01P

Drive + Motor + Control Unit, NEMA 23 Frame, 620 mNm Holding Torque, Incremental Encoder

Request Quote
View Details
CO-5718L-01P by Lin Engineering

CO-5718L-01P

Drive + Motor + Control Unit, NEMA 23 Frame, 2080 mNm Holding Torque

Request Quote
View Details
Page
per page
Filter By
Filter By
Availability
  1. For Purchase 11items
  2. For Quote 22items
Manufacturer
  1. Applied Motion Products 11items
  2. Lin Engineering 12items
Product Series
  1. Silverpak 12items
  2. STM 3items
  3. SWM 1item
  4. TSM 4items
  5. TXM 2items
Communication/Interface
  1. Analog 12items
  2. RS-232 1item
Feedback
  1. Integral Encoder 7items
NEMA Frame Size
  1. 11 1item
  2. 17 7items
  3. 23 7items
  4. 24 2items
  5. 34 2items
Number of Inputs
  1. 2 6items
  2. 3 6items
Operating Mode
  1. Analog Positioning 1item
  2. Analog Torque / Velocity 1item
  3. Encoder Following 1item
  4. Modbus RTU 1item
  5. Q Programming 1item
  6. Step & Direction 13items
  7. Streaming Commands 1item
  8. Velocity (Oscillator) 1item
Canadian Office

6221 Highway 7, Unit #15 
Vaughan, Ontario L4H 0K8 Canada  
P | 877.737.8698 • F | 877.737.8699

USA Office

dba Servo2Go.com® Ltd. 
4023 Kennett-Pike Suite #583 
Greenville, DE 19807 USA
P | 877.378.0240  • F | 877.378.0249

Helpful Links
Connect With Us!

We accept the following payment methods: Pay Pal, Visa, Master Card, American Express, and USD.