Ogura Clutch

Ogura Product Families

Industrial Electromagnetic Clutches and Brakes

Industrial products are used in automation systems where engagement timing and torque control are critical.

Single-face clutches and brakes for general engagement/disengagement
Clutch/brake combinations for indexing and positioning
Spring-applied brakes for holding loads when power is removed
Tooth clutches for no-slip engagement
Multiple-disc designs for higher torque density
Particle and hysteresis units for controlled slip and tension control

Mobile Electromagnetic Clutches

Mobile clutches are designed for belt-driven systems and engine-powered equipment.

Engage pumps, compressors, and auxiliary systems only when required
Designed for outdoor environments and vibration
Common voltage options: 12V and 24V
Available with multiple pulley types and bore configurations

General Purpose Engine-Mounted Clutches

Engine-mounted clutches connect and disconnect loads directly from engine shafts.

Designed for gas and diesel engines
Typical max speeds up to 3600 RPM
Bore sizes aligned with standard engine crankshafts
Available with pulley or direct drive outputs

Product Type	Primary Function	Key Advantage	Typical Use Case
Single-Face Clutch	Engage/disengage rotating systems	Simple design, fast response	General automation systems
Tooth Clutch	Positive engagement (no slip)	Zero slip torque transfer	Indexing systems
Spring-Applied Brake	Hold load when power is off	Fail-safe operation	Vertical axes, safety holding
Multiple Disc Clutch	High torque in compact space	High torque density	Space-constrained systems
Particle / Hysteresis	Controlled slip	Precise torque control	Tension control, winding
Mobile Clutch	Engage engine-driven loads	Designed for harsh environments	Pumps, compressors

Product Type

Primary Function

Key Advantage

Typical Use Case

Single-Face Clutch

Engage/disengage rotating systems

Simple design, fast response

General automation systems

Tooth Clutch

Positive engagement (no slip)

Zero slip torque transfer

Indexing systems

Spring-Applied Brake

Hold load when power is off

Fail-safe operation

Vertical axes, safety holding

Multiple Disc Clutch

High torque in compact space

High torque density

Space-constrained systems

Particle / Hysteresis

Controlled slip

Precise torque control

Tension control, winding

Mobile Clutch

Engage engine-driven loads

Designed for harsh environments

Pumps, compressors

	MMC Series Electromagnetic Clutches Torque Range: 37–1475 ft-lbs \| Max RPM: 1600–4000 \| Bore: 25–80 mm \| 12/24 VDC heavy-duty electromagnetic clutch CA$1,344.20	View Details
	AMC Series Electromagnetic Clutches Torque Range: 2–70 in-lbs / 0.25–8 Nm \| Max RPM: up to 3600 \| Bore: 6–15 mm \| 24 VDC zero backlash electromagnetic clutch CA$250.25	View Details
	VC Series Electromagnetic Clutches Torque Range: 5.1-150 ft-lbs \| Max RPM: up to 7000 \| Bore: 8–20 mm \| 24 VDC compact electromagnetic clutch CA$619.19	View Details
	MSC-T Series Single Disc Electromagnetic Clutches Torque Range: 9–738 ft-lbs \| Max RPM: 1800–5500 \| Bore: 15–70 mm \| 24 VDC single disc electromagnetic clutch CA$935.22	View Details
	MZ Series Electromagnetic Tooth Clutches Torque Range: 18.5–2899 ft-lbs \| Max RPM: 1400–5000 \| Bore: 20–100 mm \| 24 VDC electromagnetic tooth clutch CA$2,036.32	View Details
	MZS Series Electromagnetic Single-Position Tooth Clutches Torque Range: 18.5–181 ft-lbs \| Max RPM: 3200–5000 \| Bore: 20–40 mm \| 24 VDC single-position tooth clutch CA$2,155.01	View Details
	MWC Series Electromagnetic Multiple-Disk Clutches Torque Range: 18–8850 ft-lbs \| Max RPM: 900–4000 \| Bore: 20–140 mm \| 24 VDC multiple-disk electromagnetic clutch CA$1,573.00	View Details
	MDC Series Electromagnetic Multiple-Disk Clutches Torque Range: 12–6195 ft-lbs \| Max RPM: 200–1400 \| Bore: 20–140 mm \| 24 VDC multiple-disk electromagnetic clutch CA$1,800.37	View Details
	OPC-N Series Electromagnetic Mag-Particle Clutches Torque Range: 0.367–6 ft-lbs \| Max RPM: 1800 \| Bore: 5–15 mm \| 24 VDC magnetic particle clutch CA$989.56	View Details
	PC Series Electromagnetic Magnetic Particle Clutches Torque Range: 9–144 ft-lbs \| Max RPM: 1800 \| Bore: 15–35 mm \| 24 VDC magnetic particle clutch Request Quote	View Details
	HC Series Electromagnetic Hysteresis Clutches Torque Range: 0.0367–0.741 ft-lbs \| Max RPM: 3000 \| Bore: 5–10 mm \| 24 VDC hysteresis clutch CA$1,623.05	View Details
	AMB Series Electromagnetic Brakes Torque Range: 0.183–6 ft-lbs \| Max RPM: 3600 \| Bore: 6–15 mm \| 24 VDC electromagnetic brake CA$204.49	View Details
	VB Series Electromagnetic Brakes Torque Range: 5.1–75 ft-lbs \| Max RPM: 3600–7000 \| Bore: N/A–25 mm \| 24 VDC electromagnetic brake CA$481.91	View Details
	MSB Series Single Disc Electromagnetic Brakes Torque Range: 9–738 ft-lbs \| Max RPM: 1800–5500 \| Bore: 15–70 mm \| 24 VDC single disc brake CA$812.24	View Details
	MWB Series Electromagnetic Multiple-Disk Brakes Torque Range: 18–2304 ft-lbs \| Max RPM: 1600–4000 \| Bore: 20–90 mm \| 24 VDC multiple-disk brake CA$1,309.88	View Details